肖特基结的制备与势垒测量

采用磁控溅射方法在Nb07％-SrTiO3基片上制作Au薄膜接触,并在氧气气氛下750℃退火30 min,在室温环境下测量电流电压和电容电压等特性曲线,观测整流特性,根据相应实验数据采用饱和电流法、电容C-2与反偏电压V成线性关系计算肖特基势垒的大小.     

Oxygen‐barrier properties of copolymers based on ethylene terephthalate

The oxygen‐barrier properties of amorphous polyethylene terephthalate‐based copolymers with various acid comonomers were examined. The incorporation of increasing amounts of isophthalate, phthalate, or naphthalate gradually reduced the permeability P toward the low values obtained for the corresponding homopolymers. The permeability of poly(ethylene 3,4′‐bibenzoate) homopolymer was only slightly lower than that of polyethylene terephthalate, and the copolymers correspondingly exhibited a very gradual decrease in P as the amount of 3,4′‐bibenzoate (3,4′BB) increased. In contrast, copolymerization with the linear isomer, 4,4′BB, produced a substantial increase in P. Generally, comonomer affected the solubility S less than the diffusivity D, and therefore changes in P reflected primarily changes in D for the polymers studied. The diffusivity and solubility depended on the copolymer composition in accordance with static and dynamic free‐volume concepts of gas permeability in glassy polymers. The solubility S correlated with the amount of free volume as determined by the glass‐transition temperature. Correlation of the diffusivity D with the magnitude of the subambient γ relaxation identified dynamic free volume with thermally activated conformational changes and segmental motions. Correspondence in the activation energy confirmed the relationship. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1889–1899, 2001     

Microstructure and properties of styrene‐butadiene rubber based nanocomposites prepared from an aminosilane modified synthetic lamellar nanofiller

In this work, a novel nanocomposite series based on styrene‐butadiene rubber (SBR latex) and alpha‐zirconium phosphate(α‐ZrP) lamellar nanofillers is successfully prepared. The α‐ZrP lamellar filler is modified at the cation exchange capacity by γ‐aminopropyltrimethoxysilane and the filler surface modification is first discussed. A significant improvement of the mechanical properties is obtained by using the surface modified nanofillers. However, no modification of the gas barrier properties is observed. The impact of addition of bis(triethoxysilylpropyl)tetrasulfide (TESPT) as coupling agent in the system is discussed on the nanofiller dispersion state and on the filler–matrix interfacial bonding. Simultaneous use of modified nanofillers and TESPT coupling agent is found out with extraordinary reinforcing effects on both mechanical and gas barrier properties and the key factors at the origin of the improvement of these properties are identified. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1051–1059     

Confined crystallization of PVDF and a PVDF‐TFE copolymer in nanolayered films

Layer‐multiplying coextrusion was used in conjunction with isothermal recrystallization to study the confined crystallization of polyvinylidene fluoride (PVDF) and polyvinylidene fluoride‐tetrafluoroethylene (PVDF‐TFE) using polycarbonate (PC) and polysulfone (PSF) as confining materials. Three layered systems were produced (PC/PVDF, PSF/PVDF, and PC/PVDF‐TFE) with layer thicknesses ranging from 525 to 28 nm. The crystal morphology was affected by both layer thickness and recrystallization temperature. Specifically, increased recrystallization temperature and decreased layer thickness facilitated the formation of high aspect ratio in‐plane crystals in both PVDF based polymers. On the other side of the spectrum, thicker layers and lower recrystallization temperatures produced on‐edge PVDF crystals and isotropic PVDF‐TFE crystals. The morphology was correlated with oxygen permeability, which decreased by almost two orders of magnitude compared with the bulk. A variety of crystal structures were obtained and explained with nucleation and diffusion theory. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

A boundary element method to price time-dependent double barrier options

In this paper we propose a new method for pricing double-barrier options with moving barriers under the Black-Scholes and the CEV models. First of all, by applying a variational technique typical of the boundary element method, we derive an integral representation of the double-barrier option price in which two of the integrand functions are not given explicitly but must be obtained solving a system of Volterra integral equations of the first kind. Second, we develop an ad hoc numerical method to regularize and solve the system of integral equations obtained. Several numerical experiments are carried out showing that the overall algorithm is extraordinarily fast and accurate, even if the barriers are not differentiable functions. Moreover the numerical method presented in this paper performs significantly better than the finite difference approach.     

Kinetic Studies of the Thermal cis-to-trans Isomerization of Dioxaphospholanes

By following a previously reported method,¹ the synthesis of r-2-alkoxy-cis-4-cis-5-dimethyl-1,3,2-λ³-dioxaphospholanes ligands (1 and 3) was carried out. The purpose of this work is the kinetic study of the inversion barrier at phosphorus for 1 and 3 and the comparison with the already informed dioxaphospholane 2. The kinetic measurements of the thermal isomerization cis-to-trans were performed by ³¹P NMR spectroscopy, observing a first order kinetics for both compounds. The energy of activation (E_a) for the epimerization of compounds cis-1 and cis-3 was calculated to be 16.0 ± 0.6 and 11.8 ± 0.8 kcal/mol, respectively. The values of the thermodynamic parameters of the transition state (Δ H^≠, Δ S^≠, Δ G^≠) suggest that the inversion at phosphorus not only depends on the spatial requirements of the alkoxy substituent but also on entropic effects. The thermodynamic parameters Δ H°, Δ S°, and Δ G° were also evaluated and they show that the cis isomers are preferred from enthalpic point of view, but entropic effects dominate the equilibrium trans ? cis leading to the entropically favored trans isomers. Furthermore, the results are supported by density functional theory calculations of 1–4 at the B3LYP/6-31G** level.     

A NEW SYSTEM EXHIBITING A HIGH BARRIER TO ROTATION ABOUT THE P—N BOND. SYNTHESES AND SPECTRAL STUDIES OF 1,3,2-DIAZAPHOSPHETIDIN-4-ONE DERIVATIVES

Abstract

1,3,2-Diazaphosphetidin-4-one derivatives were synthesized. Their ¹H NMR signals at ambient temperature displaed a broad doublet which eventually coalesced before becoming sharp upon warming, and the ¹³C NMR spectra also showed that the α-and β-carbons of the dialkylamino group were non-equivalent. The phenomena were ascribed to restricted rotation about the exocyclic P—N bond.     

Cross‐linked Multilayer Polymer‐Clay Nanocomposites and Permeability Properties

Abstract

Electrostatically layered aluminosilicate nanocomposites have been prepared by the sequential deposition of poly(allylamine hydrochloride)/poly(acrylic acid)/poly(allylamine hydrochloride)/saponite (PAH/PAA/PAH/saponite)₁₀ on poly(ethylene terephtalate) (PET) film. Exfoliated saponite nanoplatelets were obtained by extensive shaking, sonication, and centrifugation of a water suspension. To minimize permeability and improve the mechanical integrity, cross‐linking of composite films was carried out at different temperatures. The formation of amide linkage induced through heating was observed by Fourier Transform Infrared (FT‐IR) and x‐ray photoelectron spectroscopy (XPS). The cross‐linking of nanocomposites (PAH/PAA/PAH/saponite)₁₀ showed 60% decrease in permeability of oxygen when compared with the pristine PET substrate film. In contrast, water permeability of the nanocomposite membrane was not affected by heating temperature and deposition cycles.     

Ni2P-NiS双助剂促进g-C3N4光催化产氢动力学

本文通过简单的一步水热法得到Ni₂P-NiS双助催化剂,之后采用溶剂蒸发法将Ni₂P-NiS与g-C₃N₄纳米片结合构建获得无贵金属的Ni₂P-NiS/g-C₃N₄异质结。研究结果表明,优化后的复合材料具有良好的光催化产氢活性,其产氢速率最高可到6892.7 μmol·g^-1·h^-1,分别为g-C₃N₄ (150 μmol·g^-1·h^-1)、15%NiS/g-C₃N₄ (914.5 μmol·g^-1·h^-1)和15%Ni₂P/g-C₃N₄ (1565.9 μmol·g^-1·h^-1)的46.1、7.5和4.4倍。这主要归因于Ni₂P-NiS相比Ni₂P和NiS单体具有更好的载流子转移能力,其与g-C₃N₄形成的肖特基势垒能有效促进光生载流子在二者界面上的分离,同时Ni₂P-NiS能进一步降低析氢过电势,进而显著增强了表面析氢反应动力学。本研究为开发稳定、高效的非贵金属产氢助剂提供了实验基础。     

The metallic C6S monolayer with high specific capacity for K-ion batteries

K-ion batteries (KIBs) attract considerable attention due to the abundance of K, high-working voltages, and chemical similarity with Li, enabling the utilization of mature Li-ion technology. However, shortage of high-performance anode materials is a critical obstacle for the development of KIBs. Through first-principles swarm-intelligence structural search, we identify a potential anode material, the C₆S monolayer, which provides not only a remarkably high specific capacity of 1546 mAh/g but also a low diffusion barrier of 0.11 eV and a low open-circuit voltage of 0.21 V. Inherent metallicity originates from delocalized π electrons.